SAST, DAST, IAST, and Software Composition Analysis

An application security scanner reports a possible injection flaw. Another scanner tests the running application and reports nothing. Which result should you trust? The answer isn’t automatically the first result, the second result, or even the tool with the more impressive repo…

An application security scanner reports a possible injection flaw. Another scanner tests the running application and reports nothing. Which result should you trust? The answer isn’t automatically the first result, the second result, or even the tool with the more impressive report. You need to know what each technique examined, which parts of the application it could observe, and whether the available evidence supports a real penetration-test finding.

CompTIA PenTest+ objective 3.1 names four relevant techniques: static application security testing, dynamic application security testing, interactive application security testing, and software composition analysis. You’ll often hear those shortened to SAST, DAST, IAST, and SCA. They aren’t interchangeable scanners competing to produce one final truth. They examine different evidence and answer different questions. Their value comes from understanding those differences and fitting each perspective into an authorized testing program.

Static application security testing examines source code or related compiled artifacts without requiring the application to run. A static analyzer can follow data paths, identify suspicious functions, and flag code patterns associated with security weaknesses. Because it can inspect code that isn’t currently executing, it may reveal a dangerous path hidden behind an uncommon feature, a privileged workflow, or a branch that the test account can’t reach.

That visibility is useful, but a static warning isn’t proof that an attacker can exploit the condition. The analyzer may misunderstand how input is constrained elsewhere, fail to account for a protective control, or report a suspicious pattern that isn’t reachable in the deployed application. This is one reason static analysis can produce false positives. It can also miss weaknesses when the relevant behavior depends on runtime configuration, external services, generated code, or application logic the analyzer can’t model correctly. Access to code provides valuable evidence, not perfect knowledge.

Dynamic application security testing takes a different view. It interacts with a running application and observes externally visible behavior. A dynamic test might submit inputs to an authorized web application, inspect responses, and look for behavior consistent with a vulnerability. It can provide strong evidence about what the deployed application actually does under the conditions tested. It may also assess an application when source code isn’t available.

The phrase under the conditions tested matters. A dynamic scanner sees the routes, functions, identities, and data that its test process can reach. If it can’t authenticate, navigate a workflow, or supply a required prerequisite, it may never exercise vulnerable behavior.

A clean dynamic report therefore doesn’t prove that the entire application is free from weaknesses. It means the test didn’t identify a weakness through the behavior it exercised. Coverage gaps, scanner configuration, account privileges, and application state can all affect that result.

Interactive application security testing also observes a running application, but it does so with information from inside the application’s runtime environment. Instrumentation can connect an external request to the code and data flow that process it. That internal context can help distinguish harmless behavior from a dangerous path and can give developers more precise information about where the behavior originates. Like other runtime techniques, though, it depends on exercised behavior. If testing never reaches a function, runtime instrumentation may have nothing to observe there.

Software composition analysis focuses on third-party and open-source components and dependencies. Modern applications commonly include code the organization didn’t write itself. Composition analysis identifies those components and evaluates the risks associated with them. Its central question isn’t whether a custom input-handling function is safe. It’s whether the application includes a component or dependency that requires security attention.

An SCA alert can establish that a particular component is present or believed to be present, but that still needs interpretation. The deployed version, packaging, configuration, and use of the affected functionality can influence what the alert means for the engagement. Conversely, an incomplete component inventory can create a false negative by leaving a dependency unrecognized. Composition analysis is necessary evidence for dependency risk, but it doesn’t replace analysis of custom code or observation of running behavior.

The timing of these techniques also matters. Secure software practices work best when they’re integrated throughout development instead of being postponed until one final security test. Static analysis and composition analysis can provide feedback while code and dependencies are being selected and changed. Dynamic and interactive testing need a running application, so they fit when a suitable build and test environment exist. A penetration test may use available results from several stages, but it still has to evaluate whether those results apply to the authorized target and its current state.

Suppose a static rule flags a possible injection path in an authorized lab application. The flagged code processes a value used by an administrative reporting function. A dynamic scan reports no injection issue, but the scanner used an ordinary test account that can’t open that function.

These results don’t actually contradict each other. Static analysis observed a suspicious code path. Dynamic analysis didn’t exercise the path because its account couldn’t reach the required workflow.

Before taking stronger action, predict what evidence should exist if the static warning represents a real vulnerability. You’d expect controlled input to reach the identified processing path and influence a security-relevant operation in an unsafe way. The static trace may support the first part of that prediction. The dynamic result doesn’t reject it because the dynamic scanner never reached the function. At this point, the injection condition is a candidate requiring validation, not a confirmed exploit and not a disproven alert.

Your next decision starts with the engagement boundaries. Is that administrative workflow included in the authorized target? Are you permitted to use an account with the necessary role?

Is the test limited to a particular environment or time? Could the validation change data, interrupt a process, or affect another user? A technically plausible test can still be the wrong action when it exceeds the approved identity, target, timing, or operational impact.

If the required access is authorized, choose the lowest-impact method that can establish the needed evidence. That might mean reviewing the relevant path more closely, asking for an approved test account, or performing a carefully bounded validation in the designated environment. The objective isn’t to force the application into the most dramatic failure possible. It’s to determine whether untrusted input can reach the suspected operation and whether the existing controls prevent the unsafe result.

If the privileged workflow isn’t authorized, don’t silently expand the test. Document what the static tool observed, why the dynamic test couldn’t evaluate the path, and what access or clarification would be necessary to continue. The correct result may be unresolved rather than vulnerable or not vulnerable. That distinction preserves the evidence instead of converting a coverage limitation into an unsupported conclusion.

This example also explains why false-positive and false-negative patterns differ. Static analysis can flag code that looks dangerous but isn’t reachable or is protected by context the analyzer didn’t understand. Dynamic analysis can miss a real weakness because its requests never reached the affected function. Interactive analysis may add runtime context and reduce some ambiguity, but only for behavior the test actually exercises. Composition analysis can accurately identify a risky dependency while saying little about a custom logic flaw, or it can miss a dependency that isn’t represented correctly in its available component data.

These are tendencies caused by visibility, not fixed promises about tool quality. A static result isn’t inherently noisy, and a dynamic result isn’t inherently more truthful. A well-supported static trace may be stronger than a poorly configured dynamic scan. A carefully executed dynamic validation may prove that a static warning has a real effect. The useful question is always the same: what did this method observe, what couldn’t it observe, and what conclusion does that evidence justify?

When outputs conflict, first investigate the test conditions. Confirm that the tools assessed the intended target and version. Check whether authentication succeeded, whether the required workflow was reachable, and whether configuration or prerequisites prevented execution.

For runtime testing, consider whether the relevant request actually arrived and whether the expected application state existed. For static testing, determine whether the reported path belongs to deployed code and whether the analyzer’s assumptions match the application. For composition analysis, check whether the dependency information applies to the build under assessment.

This troubleshooting separates three possibilities. The first is a supported security weakness. The second is an artifact, such as an incorrect rule match or stale component information.

The third is an unresolved condition caused by missing access, inadequate coverage, uncertain configuration, or insufficient evidence. Those categories lead to different reporting language and different remediation decisions. Treating every output as a confirmed finding hides those differences and makes the final report less defensible.

Imagine that the static tool points to unsafe input handling, the interactive tool records the relevant function executing, and a bounded dynamic request produces the predicted application behavior. Those observations corroborate one another. Static evidence identifies the path, interactive evidence connects the request to runtime processing, and dynamic evidence shows the externally observable effect. You still report only what was established within scope, but the combined evidence is stronger than any isolated alert.

Now consider a different result. Static analysis flags the same pattern, but runtime observation shows that the tested value is transformed before reaching the sensitive operation, and the bounded dynamic request doesn’t produce the predicted effect. That doesn’t justify deleting the static evidence without review.

It suggests that the original hypothesis may be false under the tested conditions. You’d record the protective behavior you observed, confirm that the validation exercised the intended path, and state any remaining limits. The tool alert and the validated finding are not the same object.

The common mistake is to choose one technique as the complete answer. If a team trusts only static analysis, it can miss deployed behavior and runtime context. If it trusts only dynamic analysis, unreachable or untested code may disappear from view.

If it treats interactive testing as complete, unexercised functions remain a coverage problem. If it relies only on composition analysis, custom application logic receives little attention. No single application-scanning technique covers every vulnerability class or removes the need for validation.

Instead, select a technique according to the evidence available and the question you need to answer. If you have source or compiled artifacts and need to inspect implementation paths without executing them, static analysis is relevant. If you need to observe how an authorized running target responds from an external perspective, dynamic analysis fits that question. If runtime instrumentation is available and you need internal context about exercised behavior, interactive testing can help. If the concern is third-party components and dependencies, composition analysis addresses that part of the application.

A realistic test program can combine these perspectives without running every technique indiscriminately. Start with the engagement requirement and predict what evidence would support the suspected condition. Choose an authorized action that can gather that evidence with acceptable impact.

Compare the observation with the prediction. If they don’t match, check coverage, assumptions, configuration, access, and data quality before escalating. Then preserve both the supported conclusion and the limitations that remain.

Suppose you must choose between two next actions after receiving an unvalidated SCA alert about a component in a production application. One choice is to attempt an intrusive exploit immediately. The other is to confirm that the component and relevant version are actually part of the authorized deployment, then evaluate whether a lower-impact validation can answer the security question. The second choice follows the evidence. The first jumps from a component alert to exploitability without establishing that the alert applies, and it introduces unnecessary operational risk.

The answer could change if the rules of engagement explicitly authorized a particular validation, the component’s presence had already been confirmed, and the lower-impact evidence couldn’t establish the required result. Even then, authorization doesn’t erase the need to consider timing and impact. It sets the boundary within which you select the least disruptive valid method. Stronger action should answer a necessary question, not compensate for weak analysis.

Reporting completes the process. A useful finding identifies the affected target, the technique that produced the initial observation, the validation performed, and the behavior actually confirmed. It distinguishes observed facts from interpretation and records material limitations.

If a scanner couldn’t reach a privileged workflow, say so. If a dependency alert applied to a component but exploitability wasn’t established, don’t imply that it was. If several techniques corroborated the condition, explain how their evidence connects.

That precision also improves remediation. A validated custom code path points attention toward the relevant implementation and controls. A dependency finding points toward the affected component and how it’s used. A runtime-only symptom may require further analysis before the responsible code is clear. When evidence is categorized correctly, the people fixing the application receive a defensible description of the problem instead of a scanner label stripped of context.

Application testing therefore isn’t a contest to find the scanner with the longest report. It’s a disciplined comparison of visibility. Code and compiled artifacts reveal one part of the application.

External runtime behavior reveals another. Internal runtime context and component information add their own evidence. Your job is to connect those observations without claiming more than they establish, while keeping every validation inside the authorized engagement.

SAST, DAST, IAST, and SCA become useful when you match each one to what it can actually observe. Static evidence can expose an unexecuted code path, runtime testing can show exercised behavior, and composition analysis can identify dependency risk. None of those outputs becomes a penetration-test finding merely because a tool produced it. A defensible result connects the observation to a prediction, uses the least disruptive authorized validation, and records both the confirmed behavior and any remaining uncertainty.

When two tools disagree, don’t choose a winner by reputation. Check their access, coverage, assumptions, and evidence. That turns automated output into a conclusion that developers can act on and that your engagement can support.

Pause and decide: Which result should you trust? Consult the companion episode reference for exact terminology, named tools or standards, source-derived evidence checkpoints, and review material for SAST, DAST, IAST, and Software Composition Analysis. This lesson was produced by Bare Metal Cyber dot com.

SAST, DAST, IAST, and Software Composition Analysis

headphones Listen Anywhere

More Options »
Broadcast by